7 x 7 In 3KW 240VAC 1 Phase PFA Industrial Immersion Heaters For Quartz Tanks
PFA immersion tank heaters are designed for heating fluids in tanks, especially corrosive chemicals or ultrapure water, where the chemical resistance of PFA (Perfluoroalkoxy) is essential. These heaters have PFA-coated or PFA-made wetted surfaces, making them compatible with a wide range of chemicals. They are often used in industries like semiconductor, solar, and MEMs where high purity and chemical resistance are crucial.
Specifications
| Heater Element |
Heating Coil |
| Wetted Surfaces |
PFA/PTFE |
| Wattages |
1.0 - 20 kW |
| Voltages |
120 - 480 VAC
1 or 3 phase |
| Sizes (LxW) |
7x5 to 19x14 inch |
| Height |
1-5/8 inch |
| Temperature |
200°C (392°F) |
| Hi-Limit Sensor |
Type-J thermocouple |
| Ground Wire |
Encapsulated |
| Lead Wire |
15-ft |
Dimensions
| Model |
kW |
Height |
Benefits |
| Grid |
1-6 kW* |
3/4 in |
Low Profile Design |
| Frame |
1-30 kW |
1-1/2 in |
Low Profile Design for Higher kW's |
| Fence |
1-10 kW |
Variable |
Heater on side of tank leaving center of tank open |
Industries
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
Other Applications
Ultra-High-Purity Heating
Designed with Ultra-High-Purity processes in mind, these heaters deliver clean-room assembled, reliable heating and power solutions to fit specific needs.
Products For Ultra-High-Purity Heating
Inline Heater
PFA Inline Heater
Inline Chemical Heater
Flammable Solvent Heating
Products designed to safely heat IPA and low flash-point solvents, meeting the most stringent cleanliness requirements to support next-generation semiconductor node technologies.
Products For Flammable Solvent Heating
PFA Inline Chemical Heater
PTFE Inline Chemical Heater
Inline Chemical Heater
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. These products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
Electrochemical Deposition Products
MOTS TRIPLE - VERTICAL
9HS SERIES - TUBULAR
V SERIES - VARIPOWER
Anodizing
Anodizing is an electrochemical process of converting a metal surface into an oxide layer. Mainly aluminum is used for anodizing, although other nonferrous metals, such as titanium and magnesium, can also be anodized. The metal part is connected as the anode and immersed into an acid electrolyte bath, where an electric current is applied to grow the oxide layer from the piece. The resulting surface finish will provide functional properties as corrosion-resistance and durability, as well as decorative properties.
Products For Anodizing
MOTS SINGLE - BOTTOM, DERATED
MOTS TRIPLE - L SHAPED
6HS SERIES - TUBULAR
