|
| Τόπος καταγωγής: | Κίνα |
| Μάρκα: | YINGXI |
| Πιστοποίηση: | ISO9001,CE |
| Αριθμό μοντέλου: | PS-SP-08-10M |
Many chemical baths are designed to hold a host of different chemicals.
The need to uniformly heat or cool these chemicals is met by the use of universal heat exchangers.
In its most basic design, the heat exchanger consists of two adaptors, connected to one another by many lengths of tubes.
The adaptors are round blocks with multiple holes through them, each meant to house one end of the tube.
The adaptor in turn is connected with a device that pumps out fluids, which then pass through the tube and out the other adaptor.
The fluid may be heated or cooled to accordingly heat or cool the chemical bath, respectively.
The tubes – which may be many meters in length – are submerged in the chemical bath, allowing for the heat transfer to take place between the chemical and the fluid within the tubes.
The size, length and quantities of these tubes will define the volume of fluids that can be passed through the heat exchanger.
Furthermore, the wall thickness of the tubes used will add to the efficiency of the heat transfer.
PTFE (Teflon) heat exchangers follow this design, with both the adaptors and the tubes being made from pure virgin PTFE.
Excellent chemical compatibility and rugged design for your heating or cooling application.
All wetted parts of fluoropolymer (FEP, PFA, or PTFE) construction.
Heavy duty CPVC mounting bracket and 1/8-inch thick perforated guard helps protect the coil from damage.
Heavy wall tubing improves circulation and minimizes pressure drop.
Standard coils are FEP and rated up to 60 PSI steam service. PFA coils are available for steam service up to 140 PSI.
5.5 square foot to 120 square foot of exchange area standard.
20 PSI minimum steam pressure required for operation.
Tubing sizes: 1/2 inch (12.5mm) diameter for larger coils and 1/4 inch (6.5mm) diameter for smaller coils.
Inlet and Outlet Sizing:3/4'', 1'', 1-1/2'', 2'' Available
Custom configuration including bottom style exchangers.
Anti-floatation brackets.
Special manifold configurations.
NOTE: Vacuum breakers recommended for fluoropolymer heat exchanger steam heating installations.
Βίντεο
Βίντεο
Βίντεο
Βίντεο
Βίντεο
Βίντεο
Βίντεο
